Another SOF | SouthernPaddler.com

Another SOF

W

woodman

Well-Known Member
Oct 31, 2010
346
0
72
Bates city Mo.
I decided to create a SOF using the old challenger forms...It will need to have a keel stringer....
A pic of my wood boat...
tn_100_1206.jpg

tn_100_2751.jpg

tn_100_2758.jpg

New frames cut and ready for the build....
tn_100_2762.jpg

tn_100_2763.jpg

tn_100_2764.jpg
 
W

woodman

Well-Known Member
Oct 31, 2010
346
0
72
Bates city Mo.
I really like looking at ,the skeleton, frame work of structures....

The gunwale is lowered about 3'' so from the keel to the top of it is 5''(So the height of the side went from 8'' to 5'')

tn_100_2766.jpg


I moved ,what would have been, the original top of the side panel in creating a tumblehome side...hopefully for more wind resistance...the cockpit is 48'' long...

From the bow...
tn_100_2768.jpg


And the stern..
tn_100_2770.jpg


tn_100_2772.jpg

tn_100_2773.jpg
 
W

woodman

Well-Known Member
Oct 31, 2010
346
0
72
Bates city Mo.
It is always fun paddling a new boat.....This will be a good small lake flat water boat...adding a rudder being they work fantastic wile drifting with the wind etc..etc..
tn_100_2778.jpg

tn_100_2777.jpg

Will be interesting making this look right poking through the fabric...
tn_100_2779.jpg

tn_100_2776.jpg

tn_100_2775.jpg

tn_100_2774.jpg
 
W

woodman

Well-Known Member
Oct 31, 2010
346
0
72
Bates city Mo.
Stained and coated with helmsman's spar urathaine...
100_2806.jpg

100_2807.jpg

100_2811.jpg

100_2808.jpg

With the rudder ,seat and all, it weighs 30lbs....
Had it out a few times and tracks real good without the rudder....
 
J

john the pom

Well-Known Member
Jul 30, 2007
345
1
Queensland
That is really nice, I want one! Any chance of some detail on the technique and material you have used to lash the frame members together please.
Cheers John.
 
F

FloatingBear

Well-Known Member
Aug 10, 2012
55
0
Hot Springs Arkansas
Loving the boat. Got the book. Jeff must have shipped it the morning I ordered because it only took 4 days.

How are you liking Jeffs Polyester??? I'm just not convinced yet that it will be strong enough and have enough puncture resistance. But I sure love the Idea of being able to use Minwax poly and or house paint!

I will be starting on a Yost Sea Rider frame when I get home this evening.
 
W

woodman

Well-Known Member
Oct 31, 2010
346
0
72
Bates city Mo.
FloatingBear said:
Loving the boat. Got the book. Jeff must have shipped it the morning I ordered because it only took 4 days.

How are you liking Jeffs Polyester??? I'm just not convinced yet that it will be strong enough and have enough puncture resistance. But I sure love the Idea of being able to use Minwax poly and or house paint!

I will be starting on a Yost Sea Rider frame when I get home this evening.
Click to expand...

The polyester is great..don't have to worry even when fishing around flooded timber etc...the keel stringer grinding on abrasive concrete launch ramps or sharp rocks is not to good...The Ozark streams have mostly rounded over river rock bottoms and mossy covered rock in places..again the keel stringer would need a rub strip ....and the fabric between the stringers might get the paint worn through but this polly. is tuf stuff.

That sea rider only has a 19.5'' beam..man my narrowest boat is 22'' ...I'm thinking of doing a Point Bennett 17.5 with 21'' beam and converting to SOF...

By the way ..arent you down in Arkansas...the wife has family in Fort Smith and Little Rock...
 
You must log in or register to reply here.
Top Bottom