I got up this morning and decided to overhaul one of my high country compounds, took the measurement on the peep nocking point, brace heigth and poundage , then I proceded to tear her down took it all the way down ,checked and lubed rockers,inspected the limbs,checked all the bolt on the cams and bearings also checked to make sure there were no nicks in the cable tracks everything was good so I lubed them ,put the limbs and cams back on,
Then I sat down and built two new cables and a string, installed them .
The last thing I did was take several different grits of jewlers roge and polish the cable gaurd.
Re installed peep nocks eliminitor button and silencers. Went back tto the old specs ,the first three arrows were right in the bull.
She is ready to draw some blood
Ron
Then I sat down and built two new cables and a string, installed them .
The last thing I did was take several different grits of jewlers roge and polish the cable gaurd.
Re installed peep nocks eliminitor button and silencers. Went back tto the old specs ,the first three arrows were right in the bull.
She is ready to draw some blood
Ron