Recent content by JEM

Article :p

He posts regularly on Facebook. Lots of camping pics and plenty of political posts! :p

The temptation is there to get one. I would need some more evidence of durability.

Interesting... https://www.kickstarter.com/projects/18 ... -cnc-machi

Chuck - if I may do a shameless plug.... Here's the released plans in a 12x33 version: http://www.jemwatercraft.com/proddetail ... awdad12x33 I hope to publish the 11x34 version. There's was some fine-tuning from the original prototype plans.

Both but mostly while clamped. You likely already know but worth saying: You don't to need to clamp you wood glue.

if it's a flat surface to flat surface, that will work. If it's on a curve or vertical surface, I'd add some filler to ensure it stays in place.

That's a keeper. Get ready to take 30 minutes longer to launch and 30 minutes to take it home... folks will want to talk to you about it.

Rumor is Barry likes the anguish is causes conservative minded folks especially in Bush's home state.

Link to a large image of map. Didn't want to overload the forum. https://syrianfreepress.files.wordpress ... ing-as.png

They needed hot dessert conditions over a large spread out area with multiple areas of control. My friend isn't super deep into the knowledge of everything but he did say this is all a strong-arm message to Iran and was timed intentionally with the nuclear energy talks. POTUS is trying to be...

Friend of mine is involved in this. It's a large scale military exercise that's freaking people out because not a lot is being said and much of it is being conducted on private land. Word I'm getting is the current administration was bending over for the environmentalist lobby about supposed...

Prop the boat on it's side, glass one half, flip, glass the other, let the overlap on the bottom be whatever it is for extra abrasion resistance.

Nice! From the photo, it looks like plywood if you don't look closely. But the amber tint in the epoxy will bring the grain out.

Good input Ron. My site has been silent with new published designs for a long time, Hope to change that soon. This sort of input helps me keep things in mind as the cost of marine ply goes up and the quality of all other ply goes down.